Bayonet mount

UsesGU10
This style of connector was named after its originalIEC 60061-1 (7004-121)
use for soldiers who need to mount bayonets to theGZ10
ends of their rifles in a hurry. The same need alsoIEC 60061-1 (7004-120)
applies to photographers who may need to changeGU24
lenses quickly.Pending (Mar 2007)
Several classes of electrical cable connectors, includingWhile G actually indicates bi-pin, those listed above
audio, video, and data cables use bayonethave a twist-lock, but with parallel pins from the end
connectors. Examples include BNC, C, and STinstead of opposing pins on the side.
connectors.These are the available sizes in the UK:
Home light bulbs (230/240 V mains voltage) in India,Designation
Australia, Ireland, New Zealand, the UK, Middle EastAlternative designation
and, in older installations, France, also have this typeContacts
of "B" base, as well as the Edison screw (E) baseDimension, etc.
used in the United States, Japan and other countries.BA5s
These bulbs have two pins on opposite sides of the1
cap; however, some specialized bulbs have three pins5 mm
(cap designation B22d-3) to prevent use in domesticBA7s
light fittings. Examples of three pin bulbs are found in1
mercury street lamps and fireglow bulbs in some7 mm
older models of electric fire. Bayonet cap bulbs areBAX9s
very common worldwide in applications where1
vibration may loosen conventional bulbs, such as9 mm
automotive lighting and other small indicators, and inBA9s
many flashlights.Miniature bayonet cap (MBC)
Some bulbs may have slightly offset lugs to ensure1
they can be only inserted in one direction; this is9 mm
particularly true in bulbs like the 1157 automobileBA15d
tail-light which has two different filaments to act asSmall bayonet cap (SBC)
both a running light and a signal light. In the 11572
automotive bulb, each filament has a different15 mm
brightness and is connected to a separate contact onBAX15s
the bottom of the base, the two contacts being1
symmetrically positioned about the axis of the base15 mm
(unlike a 3-way medium screw base in which the twoBA15s
filament contacts are a center circle and a ring,) soSingle centre contact (SCC)
proper orientation of the bulb is necessary to1
connect each filament to the correct separate circuit.15 mm
Newer bulbs use a wedge base which does not haveBA20s
this issue.1
Bayonet bases or caps are often abbreviated to BC,20 mm
often with a number after. The number refers to theBA20d
diameter of the base (e.g., BC22 is a 22 mm2
diameter bayonet cap lamp). BC15, a 15 mm base,20 mm
can also be referred to as SBC standing for smallBA21d
bayonet cap. The lowercase letter s or d refers to2
whether there are one (single) or two (double)21 mm
contacts on the bottom of the bulb.B21-4
Bulb bayonet mounts21 mm 4 pin
Compact fluorescent lamp with double contact B22dBA22d
bayonet mountBayonet cap (BC)
Incandescent light bulb with double contact B22d2
bayonet mount, and corresponding socket with22 mm
sprung connectorsBC-3
Preceding bulb mounted in the socketBayonet cap (BC)
LED lamps with GU10 bi-pin twist-lock mount2
Incandescent 40 W BA15d bulb22 mm 3 bayonet pins
See also: Automotive lamp typesB22d-3
Type2
IEC22 mm double ended (railway)
DINBX22d
ANSI2
B15d22 mm
IEC 60061-1 (7004-11)Of these, only the BC (BA22d) is widely used in
DIN 49721homes.
BA15dReferences
IEC 7004-11 A^ see
DIN 49720IEC 61184: Bayonet lampholders, International
BA15sElectrotechnical Commission, 1997. (also: BS EN 61184)
IEC 7004-11 Aspecifies requirements and tests for the B15 and B22
DIN 49720bayonet holders for light bulbs used in some
BA20dCommonwealth countries
IEC 7004-12See also
DIN 49730Bipin
B21s-4Arri bayonet
B22dLens mount
IEC 60061-1 (7004-10)Joseph Swan
BY22dBayonet - a type of knife that attaches to a rifle.
B24s-3